Ridged Agate Coaster Silicone Resin Mold 4-cavity

Ridged edges rubber tray 4 different shapes.

Make agate look beverage coaster, geode slice, petri dish coaster, candle or soap holder, cellphone holder, paperweight, cup mat, bowl mat, tile, table decor and craft projects.

Agate cut mold. Combine 4 parts to make a large irregular round wave coaster.

Dimension (approximate): 272x260x10mm, each cavity_117x117x8mm

Clear soft mold, you can check the buttom when process project.

Easy to demold, gloss finish

Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, mix media and more

Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food.

Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade

Tips to use with Epoxy Resin:
1) poured in silicone molds in layers, allowing air bubbles completely escape;
2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80¡ãC, turn off, ventilate it a little and put mold, filled with resin in the oven.
3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep molds remove the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

UPC:'7374358102772
Model Number:2764