Acoustic Guitar Shiny Resin Mold for Jewelry Crafting Silicone Silicon Molds For Resin Craft Casting Mould

Make your own Acoustic Guitar with this bubble free mold!

This finished piece is 2.5 inches long and 1 inch wide.


PLEASE NOTE: Using a torch to pop bubbles can and WILL quickly burn the resin releasing toxic fumes and will also damage ANY silicone mold by fusing the resin and silicone causing mold damage when removing. If you must use a torch to pop bubbles make sure you do it in a torch safe container like a silicone bowl. A heat gun is much better to use but still can damage the mold. DO NOT USE THE TORCH ON THE RESIN WHILE IN THE MOLD. It WILL damage the mold.
Using a slow cure, thinner resin is the best way to avoid bubbles. The longer the cure time, the longer the bubbles have to rise and pop!

Stir as gently as possible, do not "whip" your resin and use a plastic stick instead of wood. Simply wipe the plastic stick off with 90% isopropyl alcohol before it cures and it is reusable!

Handmade in Atlanta, Ga.


All molds are made to order and brand new, unused.

Durable, tear resistant silicone is used for this mould, making it a very resilient, very long lasting mold.

Clean your molds gently under running water after every use to preserve the shiny finish. Do not scratch at something in the mold or rub repeatedly, it will wear away the shiny finish and make that spot matte.


Resin pieces not included, pictured to show result of the mold.